Баскаса WHARFEDALE PRO DELTA-X18B (8 Ohm)
- Наличност: В наличност
- Кат. номер: 11867
Профи Саунд ЕООД като официален дистрибутор на марката Wharfedale Pro, разполага с всички резервни части и осигурява бърз гаранционен сервиз за продуктовата гама.
Баскаса с пасивен филтър и филтриран изход за горна линия WHARFEDALE PRO DELTA-X18B
- 18″ Subwoofer
- 4.0″ voice coil
- 800 watts AES (RMS)
- 1600 watts Programme
- 3200 watts Peak
- 134 dB Max SPL @ 1 meter
Birch PLywood
All Delta-X models use premium Baltic birch plywood construction.
Not only does this create a solid and durable cabinet, but it also contributes to the overall sound and character.
Delta-X is also covered in our most durable and hard wearing Rhino Rock paint finish. This ensures that a Delta-X will always look as good as the day you unboxed it.
Solid as a rock
As with all Wharfedale Pro PA systems, years of expertise is behind a loudspeaker built to last, with thanks to our high standards of quality control.
The Delta-X series are coated in the highest quality Rhino Rock paint finish – a chip resistant texture with a professional, discrete aesthetic whilst being prepared for the rigours of life on the road.
Routed logo
Delta-X features a routed Wharfedale Pro logo.
It is a logo to be proud of. A logo that lets your audience know that the sound of your even will be of the highest possible quality.
New CROSSOVER DESIGN
Internally Delta-X models have a new crossover design and construction.
Using new component positioning and bracing, the sensitive crossover electronics have been re-engineered to improve long term performance and reliability – even at the highest of volumes.
Bi-amp & passive modes
In BI-AMP mode, two power amplifiers can be used. This gives you the advantage of being able to select the best power amplifier specifications for each driver inside the loudspeaker. In a BI-AMP configuration, an external crossover is used to separate the frequencies and this splits the signal to the dedicated LF amplifier and the HF amplifier. This way, each amplifier is only working on the given frequency range and, in turn, is powering the corresponding driver inside the loudspeaker.
In PASSIVE mode, a single amplifier can be used to power all drivers inside the loudspeaker. The full frequency range is put into the loudspeaker and the loudspeakers’ internal crossover separates the frequencies, delivering the right frequencies to the right driver. In the example of a 2-way passive loudspeaker, this means that the single amplifier is powering both the HF compression driver and the LF transducer. The internal crossover takes care of both the frequency and power separation.
Model Name Delta X18B
System Type Passive
Configuration Subwoofer
Frequency Response (+/-3 dB) 38 Hz-1.5 KHz(BI-AMP)
Frequency Range (-10 dB) 30 Hz-1.5 KHz
Sensitivity (2.83 v / 1 m) 99 dB
Calculated Maximum SPL @1 m 134 dB
System Rated Impedance 8 Ω
Low Frequency Transducer
Size 470 mm / 18″
Voice Coil Size 102 mm / 4″
Rated Impedance 8 Ω or 4 Ω
LF Power (re:AES2-2012) 800 w
High Frequency Transducer
Power
System Continuous Power 800 w
System Programme Power 1600 w
System Peak Power 3200 w
Crossover frequency
Input Connector 2 x NL4 (speakON Compatible)
Hardware
Pole Mount 35 mm
Handles 2 on Sides
Enclosure
Enclosure Material 15 mm Plywood
Finish Rhino Rock
Grille Material & Finish 1.5 mm Steel Black
Dimensions – Unpacked
Height 539 mm / 21.2”
Width Front 539 mm / 21.2”
Width Rear 539 mm / 21.2”
Depth 650 mm / 25.6”
Dimensions – Packed
Height 624 mm / 24.6″
Width Front 611 mm / 24.1″
Width Rear 611 mm / 24.1″
Depth 722 mm / 28.4″
Weight
Net Weight (kg / lbs) 37.3 kg / 82.06 lbs
Gross Weight (kg / lbs) 43.2 kg / 95.04 lbs
