Пулт с усилвател DYNACORD PowerMate 1000-3

​Reference-Powermixer, 2x 1000 W RMS/4 Ohm, 6+4 channels 



SPECIFICATIONS: 

Channels (Mono + Stereo) 6 + 4 
Auxiliaries (MON, FX, AUX) 2 Pre, 2 Post, 2 Pre/Post switchable 

Maximum Midband Output Power,1 kHz, THD=1%, 
Dual Channel: 
into 2.66 Ohms 2 x 1350 W 
into 4 Ohms 2 x 1000 W 
into 8 Ohms 2 x 600 W 
Rated Output Power,THD=0.1%, Single Channel: 
into 4 Ohms 2 x 900 W 
into 8 Ohms 2 x 450 W 
Maximum Output Voltage of power amplifier, no load - 74 Vrms 

THD at 1kHz, MBW=80kHz : 
MIC input to Master A L/R output, +16 dBu, typical < 0.005% 
POWER AMP INPUTS to Speaker L/R output < 0.075% 
DIM 30, power amplifier, 60Hz, 7kHz < 0.05% 
IMD-SMPTE, power amplifier, 60Hz, 7 kHz < 0.015% 
CMRR, MIC input, 1 kHz > 80 dB 
Equivalent Input Noise, MIC Input, A-weighted, 150 ? -130 dBu 
Signal/Noise-Ratio, power amplifier, A-weighted, 4 Ohms 105 dB 
Output Stage Topology, amplifier Class D 

Equalization: 
LO Shelving +/- 15 dB / 60 Hz 
MID Peaking, mono inputs +/- 15 dB / 100 Hz .. 8 kHz 
MID Peaking, stereo inputs +/- 12 dB / 2.4 kHz 
HI Shelving +/- 15 dB / 12 kHz 
Master EQ, 11-band (63, 125, 250, 400, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz: +/- 10 dB / Q = 1.5-2.5 

Filter: 
LO-CUT, mono inputs f=80 Hz, 18 dB/oct 
VOICE FILTER, mono inputs 
FEEDBACK FILTER, MON1/2 70 Hz .. 7 kHz, Notch, -9 dB 
Speaker Processing LPN, switchable 
Display High Contrast OLED 

Effects: 
Type Dual stereo 24/48-bit multi effects processors 
Effects presets 100 Factory + 20 User, Tap-Delay 
Remote control Footswitch, MIDI 

Digital Audio Interface Channels 4 In / 4 Out 
AD/DA Conversion 24bit 
Sampling Rate 44.1 / 48 / 88.2 /96 kHz 
PC Interface USB 2.0, Female Type B 
MIDI Interface 5-pin DIN connector, In / Out 
Output Power Control Adjustale RMS Limiter 
Protections Mixer Outputs (Relay controlled) MON1, MON2, MASTER A 
Amplifier Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-On-Delay