Кондензаторен микрофон Audio-Technica PRO42

Miniature unidirectional condenser boundary microphone

Miniature unidirectional condenser boundary microphone

Very low-profile design for minimum visibility
Wide-range condenser element with low-mass diaphragm for superior performance
Uniform polar pattern for maximum rejection of unwanted sounds
Rugged design and construction
25' (7.6 m) cable permanently attached between microphone and XLRM-type connector

ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Half-cardioid (cardioid in hemisphere above mounting surface)
FREQUENCY RESPONSE 70-14,000 Hz
OPEN CIRCUIT SENSITIVITY -38 dB (12.5 mV) re 1V at 1 Pa
IMPEDANCE 100 ohms
MAXIMUM INPUT SOUND LEVEL 134 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 105 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 65 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 9-52V DC, 2 mA typical
WEIGHT 1.2 oz (35 g)
DIMENSIONS 1.44" (36.6 mm) maximum width,
2.14" (54.3 mm) maximum length,
0.61" (15.5 mm) height
OUTPUT CONNECTOR 3-pin XLRM-type on cable
CABLE 25' (7.6 m) long, permanently attached