Семплер Juzisound Total SOLO Sampler 3

Whu Sampler 3 have 2 different software versions: for Synth and for MIDI Accordion?

Hardware of Sampler 3 is created to be most powerful sample-play hardware from Juzisound. This implement very new technology, and get maximum from this-hardware platform. Тhanks to the extensive experience he has gained over the years and previous models, Juzisound make decision to create 2 different software versions, with the same hardware, becouse user requirements when play with Synth or MIDI accordions are very different.
When use MIDI keyboard or Synth, we need only many equal uppers, and organization over this uppers. In Juzisound this is PRESET, equal to COMBI in Korg.
In contrans, when use MIDI accordion, user have very different needs. Real accordion have separate registers to change SOLO and BASS side, also bass side is combination of 2 parts, fundamental basses and chords, but this is changed together fron left side registers buttons.
Insteat of all this, software for MIDI accordion need to be with complete different organization, and Juzisound make complete new software, specialized to comply accordion user requirements. This include direct reeal time control of most of important function, direct from accordion MIDI system.
All next words will be oriented to synth version of Sampler 3!

What Sampler 3 offers?

8 totally independent Uppers
- It's possible for any of them to load any sound in any oscillator mode. All uppers play from SD card or from internal flash memory, without any limitations.

All Oscillator Modes from Sampler 2
- Sampler 3 has all oscillator modes from Sampler 2, plus some new, and new will be implemented in future.

Stereo Sampling
- Sampler 3 works with stereo samples too. Supported sample formats are: PCM WAV files, 16bit / 48kHz / Mono or Stereo.

Fractal LOPP function for all samples
- Fractal loop is absolutly new technology, not available in any hardware sampler to this time. This technology allow to make LOOP on only ONE period of sample, although the period is not an exact sample. Auto loop function is available for every sample. Sample edit editor is available too.

Sample interpolation is 4 point Hermite
-Best sounding audio interpolation for real time use.

Polyphony of 24 stereo voices
- Sampler 3 have plyphony of 24 stereo voices exact like Sampler 2.

Effects
- Sampler 3 have 5 insert effects, and 2 master effects bloks. All insert effects are with free placement. Possible to put all 5 effects to only one upper or to master bus.

Additional Audio Busses
- Sampler 3 have 3 internal additional audio busses. Possible to mix some Uppers to audio bus, and apply insert effect to this bus, equal for all uppers, without lost 3 insert boxes.

2 MIDI Connectors
- One MIDI connector is olways MIDI Input, but second MIDI conector is configurable like second MIDI Input, MIDI Output or MIDI THRU output.

Analog Master Volume
- Master volume is realized in analog part, exact like in Sampler 1. No sound quality degradation, when master volume is very low.

BIG Display
- Sampler 3 have very high contrast IPS dysplay, sunlight visible. Displa resolution is 480x272 pixels.

Micro SD card connector
- Sampler 3 use SD card in MICRO size format. SD Card is fuuly prodected from mechanical damages, becouse all card is inside sampler.

USB host connector for external USB bupad keyboard
- External USB host connector, for external MIDI input or external FLASH drive.

Terca and Scala controls
- All terca and Scala functions from Sampler 2 are available.

Sound GROUP Mode
- Sampler 3 has sound groups like Guitars, Pianos, Strings and more, for easy sound finding.

New SET LIST
- Sampler 3 has expanded SET LIST with 200 position (20 pages by 10 position).

New 4 Band EQ for every upper Upper
- Sampler 3 has absolutly new 4 band EQ for every one Upper, with new graphic user interface.

Powerful signal generator with SINE and NOISE waveforms
- Sampler 3 has precize signal generator, for tune all audio patch parameters.

Complete 32 bit float audio path + 32 bit output DAC PCM 1795
- Sampler 3 absolutly best possible digital and analog audio path, to play audio samples without any degradation of quality.

Integrated breath controller converter
- Sampler 3 have internal breath controller converter with hardware GAIN and OFFSET. Possible to control external MIDI device too.


Integrated Mp3 player
- Mp3 player play Mp3 filse from internal SD card or from USB Flash.

What is difference from Sampler 3?

- Sampler 3 have 2 CPUs on 480MHz. Sampler 2 have 2 CPUs by 400Mhz every.
- Sampler 3 have only 2 audio otputs. In Sampler 2 have 4 audio outputs.
- Sampler 3 have 8 Uppers. Sampler 2 have only 2 Uppers.
- Sampler 3 not have HelpSynth.
- Sampler 3 have 5 insert effects, with free plasement. Sampler 2 have 3 inserts per Upper but with fixed placement.
- Sampler 3 allot to put insert effects on additional 3 audio bus abd master bus too.

What is included:

• One Juzisound Total SOLO Sampler 3 device.
• One 256GB SD card, preloaded with the last version of the default sound bank.
• One Power adapter - Main power (230V AC) to 24V DC - EU Plug Standard.
• One MIDI cable.
• Warranty card.
• Quick Start guide.