Меню
Кошница

Пасивна тонколона Wharfedale Pro FOCUS 15

Пасивна тонколона Wharfedale Pro FOCUS 15
Пасивна тонколона Wharfedale Pro FOCUS 15
Ново -1 %
Пасивна тонколона Wharfedale Pro FOCUS 15
Пасивна тонколона Wharfedale Pro FOCUS 15
Пасивна тонколона Wharfedale Pro FOCUS 15
1,685.00 лв.
1,700.00 лв.
  • Наличност: Предварителна поръчка
  • Кат. номер: Wharfedale Pro FOCUS 15
Купи

Купи с

48 вноски по 56.50 лв.

Купи на изплащане със стоков кредит от Банка ДСК

• Улеснена процедура за електронно подписване
• Атрактивни условия по кредита
• Параметри изцяло по Ваш избор
• Одобрение до няколко минути изцяло онлайн

Размер на кредита /лв./
Месечна вноска /лв./
Обща дължима сума /лв./
ГПР /%/
Изчисленията са направени при допускането за първа падежна дата след 30 дни и са с насочваща цел. Избери най-подходящата месечна вноска.

FOCUS 15

700 watts
AES (RMS)
  • 15″ passive loudspeaker
  • Dual angle 35mm pole socket
  • 4.0″ voice coil LF driver
  • 3.2″ voice coil HF driver
  • 700 watts AES (RMS)
  • 1400 watts Programme
  • 2800 watts Peak
  • 135 dB Max SPL @ 1 meter





Optimized acoustic engineering

Focus tops and subs are superbly engineered to work together seamlessly and provide maximum efficiency. 

The two-way Focus 12 and Focus 15 models employ High-Q 100° x 10° long-throw waveguide horn geometry to project the sound to the back of large listening areas. All this comes together to create a point-source array system!

For more details of wiring connections for either Passive mode or Bi-Amp mode, please check the User Manuals.

Passive & Bi-amp mode

Focus 12 and Focus 15 full range models feature Passive and Bi-Amp mode switching.

In PASSIVE mode, a single amplifier can be used to power all drivers inside the Focus.  The full frequency range is put into the loudspeaker and the Focus’ internal crossover separates the frequencies, delivering the right frequencies to the right driver.  This means that the single amplifier is powering both the HF compression driver and the LF transducer.  The internal crossover takes care of both the frequency and power separation.

In BI-AMP mode, two power amplifiers can be used.  This gives you the advantage of being able to select the best power amplifier specifications for each driver inside the loudspeaker.   In a BI-AMP configuration, an external crossover is used to separate the frequencies and this splits the signal to the dedicated LF amplifier and the HF amplifier.

This way, each amplifier is only working on the given frequency range and, in turn, is powering the corresponding driver inside the loudspeaker.

Super PLY

All Focus models use premium Baltic birch plywood construction.

Not only does this create a solid and durable cabinet, but it also contributes to the overall sound and character.

Focus series are also covered in our most durable and hard wearing Rhino Rock paint finish. This ensures that a Focus loudspeaker will always look as good as the day you unboxed it.

Super fly

Focus series hardware allows you to fly in a line-array configuration, fly independently and in pairs or stack PA’s on top of subs. 

Focus adapts perfectly to whatever challenges your venue presents you with!

SOnic Impact

At peak output levels a single Focus 15 can pump out 135 dB SPL and maximum power handling is rated at 2800 watts peak. Focus subs put out an equally impressive 146 dB Max SPL of pounding bass with a maximum power handing capacity of 8000 watts peak. 

Need more? Just double up! The Focus V-Tech side-by-side driver placement maximizes mutual coupling and boundary-effect reinforcement to move massive amounts of air and push the beat to the soul of your audience.


SPECIFICATIONS

Model Name

Focus-15

System Type

Passive

Configuration

Two-way

Frequency Response (+/-3 dB)

50 Hz – 20 KHz

Frequency Range (-10 dB)

45 Hz – 20 KHz

Sensitivity (2.83 v / 1 m)

99.5 dB

Calculated Maximum SPL @1 m

135 dB

System Rated Impedance

8 Ω

Low Frequency Transducer


Size

390 mm / 15″

Voice Coil Size

102 mm / 4″

Rated Impedance

8 Ω

LF Power (re:AES2-2012)

700 w

High Frequency Transducer


HF Driver Type

Compression Driver

Voice Coil Size

81 mm / 3.2″

Exit Size

35.5 mm / 1.3″

Diaphragm Material

Titanium

Rated Impedance

8 Ω

HF Power (re:AES2-2012)

75 w

Nominal Coverage (H x V)

100° x 10°

Power


System Continuous Power

700 w

System Programme Power

1400 w

System Peak Power

2800 w

Crossover frequency

1.6 KHz

Input Connector

2 x NL4
(speakON Compatible)

Hardware


Pole Mount

Dual-angle
35 mm Pole Socket

Handles

2 On Sides

Enclosure


Enclosure Material

15 mm Plywood

Finish

Black Rhino Paint

Grille Material & Finish

1.5 mm Steel

Dimensions – (Unpacked)


Height

690 mm / 27.17″

Width Front

455 mm / 17.91″

Width Rear

224.5 mm / 8.84″

Depth

433 mm / 17.05″

Dimensions – (Packed)


Height

750 mm / 29.53″

Width Front

500 mm / 19.69″

Width Rear

285 mm / 7.28″

Depth

480 mm / 18.9″

Weight


Net Weight

34.1 kg / 75 lbs

Gross Weight

36.5 kg / 80.3 lbs






Напишете мнение

Забележка: HTML не се потдържа!
Лош Добър
Cloudflare Turnstile Captcha

ПРЕДВАРИТЕЛНА ПОРЪЧКА

Поръчаните стоки с "предварителна поръчка" от сайта могат да бъдат платени по следните начини:


1. Авансово по Банков път

Име на фирмата: Профи Саунд ЕООД

Банка: Уникредит Булбанк АД    

IBAN: BG37UNCR70001522407517

BIC: UNCRBGSF


2. Плащане с дебитна или кредитна карта.

Може да заплатите своята поръчка с дебитни или кредитни карти Visa и MasterCard. Разплащането се осъществява с помощта на банкова система БОРИКА.


Информация за фирмата:

Профи Саунд ЕООД, ЕИК200952190

МОЛ: Иван Радославов Радославов

със седалище гр. Пловдив ул. Мара Гидик 17

адрес за кореспонденция: гр. Пловдив ул. Пушкин 6, Музикален Магазин Радославов