Кондензаторен микрофон Electro-Voice PL37

​Cardioid Condenser Overhead Microphone.

The PL37 is a professional-grade tight cardioid condenser microphone designed to deliver all of the crisp detail of cymbals, high-hats and percussion instruments in any size sound reinforcement system or recording studio. With its frequency response designed for overhead drum set and percussion miking, the PL37 delivers all of the "dialed-in" tone and percussive transient response detail professional drummers and sound system engineers require. The PL37's tight cardioid polar pattern is designed to minimize off-axis information from nearby stage instruments entering the capsule, and allows for a clean drum set sound and higher gain before feedback. Although designed to be an overhead drum set and percussion microphone, the PL37 can also be used as an acoustic instrument microphone in applications where a condenser element capsule would be desired.

Features:

• Voiced for overhead cymbals, high-hat and percussion
• Crisp frequency response
• Fast transient response
• Tight cardioid polar pattern for isolation
• Superb rejection of off-axis information
• High-output self-biased condenser element

Technical Specifications:

• Element Type: Self-Biased Condenser
• Frequency Response: 50 Hz - 16.000 Hz
• Polar Pattern: Cardioid
• Sensitivity, Open Circuit Voltage, 1 kHz: 7.0 mV/Pa (-43 dBV)
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
• Rated Impedance: 200 Ohms
• Max SPL (1% THD at1 kHz): 132 dB SPL
• Self Noise: 25 dB SPL, A-weighted
• Dynamic Range: 107 dB
• Signal-to-Noise Ratio: 69 dB (at 94 dB SPL)
• Power Requirements: Phantom Supply Requirement 11 to 52 VDC, 4 mA
• Microphone Connector: 3-pin, XLR-type
• Finish: Textured black satin body with MemraflexTM grille
• Dimensions: Length = 162.5 mm, Width = 29.0 mm, Shank = 21.1 mm
• Accessories Included: Stand adapter with Euro-thread insert, Soft zippered gig bag
• Net Weight: 176 g