Menu
Your Cart

SENNHEISER Pro Audio XSW 2-835-B

SENNHEISER Pro Audio XSW 2-835-B
SENNHEISER Pro Audio XSW 2-835-B
936.46 лв.
  • Stock: Out Of Stock
  • Model: 9880

Wireless Handheld Microphone System with e835 Capsule 

For Live Sound Applications 
e835 Evolution Microphone Capsule 
True Diversity Receiver 
Up to 12 Compatible Channels 
External Antennas 
Automatic Frequency Synchronization 
Remote Channel for Easy Setup 
Tunable Over a Range of UHF Frequencies 
Includes Rackmount Kit 
AA Batteries, Power Supply & Pouch 

specs 
System 
Modulation Wideband FM 
Frequency Range 614-638 MHz 
Switching Bandwidth Up to 24 MHz 
Frequencies Adjustable in 25-kHz steps 
8 frequency banks, each with up to 12 factory-preset channels 
Signal to Noise Ratio ? 103 dBA 
Total Harmonic Distortion (THD) ? 0.9% 
Temperature Range Operation: 32 to 104°F (0 to +40°C) 
Storage: -4.0 to 158°F (-20 to +70°C) 
Transmitter Synchronization 2.4 GHz, low power OQPSK (only active during synchronization) 
Receiver 
Principle of Operation Double superheterodyne 
Diversity Method True diversity 
Sensitivity < 3 µV at 52 dBA rms S/N at (peak deviation) 
Frequency Response 50 Hz to 16 kHz (-3 dB) 
Maximum AF Output Voltage At peak deviation, 1 kHz AF 
1/4" (6.3 mm) Jack Socket (Unbalanced): +6 dBu 
XLR Socket (Balanced): +12 dBu 
At peak deviation, 1 kHz AF) 
Adjustment Range Audio: 40 dB, adjustable in 5-dB steps 
Power Supply Nominal Input: 100 to 240 VAC 50/60 Hz 
Input Current: 200 mA (Max.) 
Nominal Output: 12 VDC 300 mA 
Squelch Adjustable from 3 dB? V to 28 dB? V (combined with pilot tone) 
Line/Mic Level 20 dB, switchable 
Housing Material Rugged metal housing 
Dimensions (W x H x D) 7.9 x 1.7 x 5.0" (200 x 42 x 127 mm) 
Weight 24 oz (680 g) 
Transmitter 
RF Output Power 10 mW 
AF Frequency Response 80 Hz to 16 kHz 
Power Supply 2 x AA size batteries, 1.5 V 
Operating Time Approximately 10 hours 
Microphone Type Dynamic 
Input Sensitivity Capsule: 1.5 mV/Pa 
Polar Pattern Cardioid 
Sensitivity Adjustment Range: 0 to -30 dB, adjustable in 10-dB steps 
Housing Material Rugged ABS housing 
Dimensions (L x Diam) 10.2 x 2.0" (260 x 50 mm) approximate 
Weight 8.6 oz (245 g) approximate

Write a review

Note: HTML is not translated!
Bad Good
Captcha