Всички продукти
The new HS1200 Hi Hat stand has 3 legs with two single braced legs at the front and a double braced leg at the rear which features the new knock-type spikes. The mechanism is a traditional, smooth and adjustable direct drive system New Hi Hat Clutch Longer rod for higher setting is included Cymbal ..
248.49€ / 486.00 лв.
-10 %
Light weight, compact design, single-braced, for 12" and smaller snare drums Available Height Range 43-62cm Tilter Normal Arms 3 Arms (for 12" Snare Drum) Big Rubber Feet No Leg Design 3 Single Braced Legs ..
81.60€ / 159.60 лв. 91.01€ / 178.00 лв.
-1 %
Specs Design/Architecture DetailAvailable Height Range 45-61cm Tilter Normal Arms 3 Arms Big Rubber Feet Yes Leg Design 3 Single Braced Legs ..
85.28€ / 166.79 лв. 86.41€ / 169.00 лв.
-7 %
Medium weight, doubled-braced legs, big rubber feet. Snare Basket Adjustment Knob Big Rubber Feet ..
114.00€ / 222.96 лв. 122.20€ / 239.00 лв.
-11 %
The CSAT940 can be used for two stage cymbal arrangemants or a closed hi-hat arrangement. The CSAT940 attach to cymbal stands and holders (except the CS655A, CS650A, CS660A, CS665A). ..
26.80€ / 52.42 лв. 30.06€ / 58.79 лв.
-2 %
Cymbal Holder - long boom, lower pipe height adjustment possible. Boom: 12mm diameter x 327mm long. Base stand: 19/22mm diameter x 300/350mm length. ..
51.24€ / 100.22 лв. 52.54€ / 102.76 лв.
-12 %
The boom stand with light weight, compact design, offset tilter, single-braced legs. Design/Architecture Detail Available Height Range 79-162cm Tilter Offset Tilter Boom Tilter Mechanism - Normal Big Rubber Feet - No Leg Design 3 Single Braced Legs ..
85.28€ / 166.79 лв. 96.63€ / 188.99 лв.
Double Chain, slim footplate, left-foot version The new 9500 series pedals are available as a Single Pedal or Double pedal and either a double chain version or a direct drive version for 2 distinctly different feels. In the instance of the double chain version this can also be modified into a belt ..
378.96€ / 741.18 лв.
Single Foot Pedal - Chain Drive, Longer Footboard Beater Shaft Locker Beater Angle Adjustment Spring Tension Adjustment with Self Lock Simple Hoop Clamp Mechanism Spring Roller with Built-in Bearings Base Frame Tie Rods Longer Footboard Chain Drive Frame Structure : This Yamaha original design inco..
156.11€ / 305.32 лв.
Single Foot Pedal with Single Chain Drive. Single Chain Drive, horizontal frame brace, beater angle adjustment..
116.40€ / 227.66 лв.
Hardware Packet : 2 x CS755 - boom cymbal stand 1 x SS740A, - Single Braced snare stand 1 x HS740A - 3 Single Braced Legs, Tension control 1 x FP7210 - Bass Drum Pedal Single Chain Drive..
430.80€ / 842.57 лв.
-3 %
This clamp attaches a tom clamp (CL945B, etc.) or cymbal holder (CH755, etc.) to the hex-shaped pipe and is compatible with 22.2mm diameter pipes. Its vertical angle is freely adjustable. Get A Grip HEXRACKII clamps get a rock solid grip on the rails with a synthetic sleeve that fits between the cl..
38.90€ / 76.08 лв. 40.13€ / 78.49 лв.