YAMAHA STUDIO&PA DBR12

​12" 2-way Powered Loudspeaker 
The DBR12 represents a perfect balance of size and performance, with 1000W of power and outstanding resolution at any output level. Ideal for front-of-house, floor monitoring applications or even the stage side fills, the DBR12 is an ideal choice for a wide range of applications. 

Speaker type 2-way, Bi-amp powered speaker, Bass-reflex type 
Frequency range (-10dB) 52Hz – 20kHz 
Nominal coverage H 90° 
V 60° 
Components LF Diameter:12" cone, Voice Coil:2", Magnet:Ferrite 
HF Diaphragm:1.4", Type: 1" throat compression driver, Magnet:Ferrite 
Crossover 2.1kHz: FIR-X tuning™ (linear phase FIR filter) 
Output power Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W) 
Maximum output level (1m; on axis) 131dB SPL 
I/O connectors INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) 
Processors D-CONTOUR: FOH/MAIN, MONITOR, OFF 
Heat dissipation Fan cooling, 4 speeds 
Power requirements 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz 
Power consumption 74W(1/8 Power Consumption), 18W(Idle) 
Cabinet material Plastic 
Finish Black 
Handle Side x 2 
Flying and mounting hardware Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts) 
Pole socket 35mm (Bottom x 1) 
Dimensions W 376mm (14.8") 
H 601mm (23.7") 
D 348mm (13.7") 
Net weight 15.8 kg (34.8 lbs) 
Accessories BBS251, BCS251, BWS251-300, BWS251-400 (Optional Speaker bracket)