WHARFEDALE PRO DELTA-X10

Профи Саунд ЕООД като официален дистрибутор на марката Wharfedale Pro, разполага с всички резервни части и осигурява бърз гаранционен сервиз за продуктовата гама.

Пасивна тонколона WHARFEDALE PRO DELTA-X10

• 10″ 2-way passive 
• 1.75″ voice coil HF driver
• 2.5″ LF voice coil
• 300 watts AES (RMS)
• 600 watts Programme
• 1200 watts Peak
• 129 dB Max SPL @ 1 meter

Birch PLywood

All Delta-X models use premium Baltic birch plywood construction.

Not only does this create a solid and durable cabinet, but it also contributes to the overall sound and character.

Delta-X is also covered in our most durable and hard wearing Rhino Rock paint finish. This ensures that a Delta-X will always look as good as the day you unboxed it.

Solid as a rock

As with all Wharfedale Pro PA systems, years of expertise is behind a loudspeaker built to last, with thanks to our high standards of quality control.

The Delta-X series are coated in the highest quality Rhino Rock paint finish – a chip resistant texture with a professional, discrete aesthetic whilst being prepared for the rigours of life on the road.

Routed logo

Delta-X features a routed Wharfedale Pro logo.

It is a logo to be proud of. A logo that lets your audience know that the sound of your even will be of the highest possible quality.

New CROSSOVER DESIGN

Internally Delta-X models have a new crossover design and construction.

Using new component positioning and bracing, the sensitive crossover electronics have been re-engineered to improve long term performance and reliability – even at the highest of volumes.

Bi-amp & passive modes

In BI-AMP mode, two power amplifiers can be used. This gives you the advantage of being able to select the best power amplifier specifications for each driver inside the loudspeaker. In a BI-AMP configuration, an external crossover is used to separate the frequencies and this splits the signal to the dedicated LF amplifier and the HF amplifier. This way, each amplifier is only working on the given frequency range and, in turn, is powering the corresponding driver inside the loudspeaker.

In PASSIVE mode, a single amplifier can be used to power all drivers inside the loudspeaker. The full frequency range is put into the loudspeaker and the loudspeakers’ internal crossover separates the frequencies, delivering the right frequencies to the right driver. In the example of a 2-way passive loudspeaker, this means that the single amplifier is powering both the HF compression driver and the LF transducer. The internal crossover takes care of both the frequency and power separation.

Model Name    Delta X10
System Type    Passive
Configuration    Two-way
Frequency Response (+/-3 dB)    65 Hz-20 KHz
Frequency Range (-10 dB)    60 Hz-20 KHz
Sensitivity (2.83 v / 1 m)    97 dB
Calculated Maximum SPL @1 m    128 dB
System Rated Impedance    8 Ω
Low Frequency Transducer    
Size    288 mm / 10″
Voice Coil Size    63.5 mm / 2.5″
Rated Impedance    8 Ω
LF Power (re:AES2-2012)    300 w
High Frequency Transducer    
HF Driver Type    Compression Driver
Voice Coil Size    44.5 mm / 1.75″ Titanium
Exit Size    25.4 mm / 1″
Diaphragm Material    Titanium
Rated Impedance    8 Ω
HF Power (re:AES2-2012)    40 w
Nominal Coverage (H x V)    90⁰ x 60⁰
Power    
System Continuous Power    300 w
System Programme Power    600 w
System Peak Power    1200 w
Crossover frequency    2.8 KHz
Input Connector    2 x NL4 (speakON Compatible)
Hardware    
Pole Mount    Dual Angle (0⁰/10⁰) 35 mm
Handles    2 on Sides
Enclosure    
Enclosure Material    15 mm Plywood
Finish    Rhino Rock
Grille Material & Finish    1.5 mm Steel Black or White
Dimensions – Unpacked    
Height    500 mm / 19.7”
Width Front    338 mm / 13.3”
Width Rear    212.4 mm / 8.4”
Depth    330 mm / 13”
Dimensions – Packed    
Height    575 mm / 22.6″
Width Front    400 mm / 15.7″
Width Rear    300 mm / 11.8″
Depth    386 mm / 15.2″
Weight    
Net Weight (kg / lbs)    16.58 kg / 36.5 lbs
Gross Weight (kg / lbs)    19.6 kg / 43.0 lbs