Menu
Your Cart

Tonor Condenser Microphone - Универсален студио комплект

Tonor Condenser Microphone - Универсален студио комплект
-43 %
Tonor Condenser Microphone - Универсален студио комплект
99.00 лв.
175.00 лв.
  • Stock: In Stock
  • Model: 10210

ОФЕРТА НА МЕСЕЦА!!!

​Универсален студио микрофон, комплект със стойка за бюро, кабел (XRL - 3.5 mm), държач, поп-филтър, предпазен дунапрен

и мини USB звукова карта (преход от 3,5mm жак на USB).

В комплекта:

1 x кондензаторен микрофон 

1 x стойка  за микрофона 

1 x скоба за маса 

1 x вибрационен амортисьор 

1 x микрофонен поп филтър 

1 x дунапрен

1 x 3,5 мм кабел за микрофон с нисък шум (8,2 фута / 2,5 м) 

1 x външна USB звукова карта  

ЗАБЕЛЕЖКА:

 Когато подреждате обзавеждането, поставете логото "TONOR" директно срещу вас.

 Гласът ще звучи по-ясно тогава.

Description
The XRL to 3.5mm condenser microphone adopts the exacting complete electronic circuit control and gold-plate diaphragm capsule. 
With a good cardioid polar pickup pattern, high output and low self-noise function, the microphone can accurately reproduce even the most subtle sound. 
It is suitable especially for studios, recording,broadcasting etc.

Specification 
Element: Ф16 Pressure Gradient Transducer
Polar Pattern: Uni-directional
Frequency Response: 20Hz-20kHz
Sensitivity:-38dB±2dB(0dB=1V/Pa al 1kHz)
Output Impedance:150Ω±30%(al 1kHz)
Load Impedance:≥1000Ω
Equivalent Noise Level:16dBA
Max. SPL:130 dB(al 1kHz≤1% T.HD)
S/N Ratio: 78dB
Electrical Current:3mA
Net Weight:346g
Body Dimensions: Ф46 x 150mm

Note
1.When connect the podcasting condenser microphone with laptop, please connect the laptop to electrical outlet(5V Voltage or 48 volt phantom power). The microphone could be used alone when connect with desktop computer.
2.Please decrease the volume and keep a sufficient distance between the microphone and the speaker to avoid howling sound. 
Please put the microphone away from the amplifier to avoid recording noise due to amplifier.
3.To maintain the sensitivity and quality of sound reproducing, avoid exposing it to moisture and extreme temperatures.
4.Maximum 5cm thickness for table clamp

Package Included
1 x Podcasting Condenser Microphone
1 x Microphone Suspension Scissor Arm Stand
1 x Table Mounting Clamp
1 x Anti Vibration Shock Mount 
1 x Microphone Pop Filter
1 x Foam Protective Anti-wind Cap Cover
1 x 3.5mm XLR Low Noise Microphone Cable ( 8.2ft/2.5m)

Tips
For optimal sound quality, face the sound source directly onto the screened sides with "TONOR" logo of the microphone head.

Write a review

Note: HTML is not translated!
Bad Good
Captcha