JBL CONTROL 88M

​Двулентови 8инча, (200 мм) коаксиален тип "гъба"говорители. Проектирани за приложения на открито, издържливи на климатични промени тези високоговорители от серията Control 80 Series ,предлагат отлично качество на звука и цял диапазон на покритие от 360 градуса. Проектирани да бъдат монтирани на земята или в земята, високоговорителите от серията Control 80 Series, могат да се използват в различни приложения, включително търговски центрове, тематични паркове, спортни заведения, хотели, казина, курорти, ресторанти, места за отдих, и навсякъде където се изисква висококачествена музика . Компактен в дизайна, говорителят е ненатрапчив и лесно се смесва със заобикалящата среда. Твърдата полиетиленова кутия е устойчива на злоупотреби ,а цветът на корпуса е еднакъв навсякъде , така че да не се забелязва, дори когато е изстърган или надраскан.
Two-Way 8 inch (200mm) Coaxial Mushroom Landscape Speaker

Designed for outdoor applications, the highly weather resistant Control 80 Series Landscape speakers provide excellent full-range sound quality and 360 degree coverage. Designed to be mounted on or in the ground, Control 80 Series Landscape speakers can be used in a wide variety of applications including shopping malls, theme parks, sports venues, hotels, casinos, resorts, restaurants, hospitality and leisure venues, entrance ways, and anywhere a high quality music and/or paging speaker landscape speaker is required. Compact in design, the speaker is unobtrusive and easily blends in with its surroundings. A tough polyethylene enclosure resists abuse from lawn care equipment and the elements, and the enclosure color extends throughout the material so the speaker will maintain color even when scraped or scratched.
 
 
Features
 

    Components:
    • 8” highly weather-resistant driver
    • 1” soft-dome highly weather-resistant tweeter
    120W Pink Noise Power Handling (240W program) in direct 8Ώ setting, plus built-in 60W 70V/100V multi-tap transformer
    Tough polyethylene highly weather resistant enclosure
    Fully isolated center chamber for wiring protection
    High fidelity sound character with broad frequency range of 47Hz - 16kHz

Specifications
 
Frequency Range (-10dB)     47 Hz – 16 kHz
Power Rating     240 W Continuous Program (2 hrs) 120W (480W peak), Continuous Pink Noise (2 hrs) 100W (400W peak) Continuous Pink Noise (100 hrs)
Transformer Taps     70V: 60W, 30W, 15W & 7.5W 100V: 60W, 30W, 15W
Frequency Response (±3 dB)     60Hz - 15 kHz
Maximum Input Voltage     28.0 V
Sensitivity     87 dB, 1W @ 1m (ave. 80Hz - 16kHz)
Coverage Pattern     360° H, 160° V (primary listening 10° to 50° up from ground)
Directivity Factor (Q)     2.1
Directivity Index (DI)     3.2 dB
Maximum SPL (1m)     108 dB
Impedance     8Ω (at 8Ω setting)
Minimum Impedance     6.6Ω at 9.5kHz
Insertion Loss     <0.5 dB at any tap setting
Thru Setting     8Ω nominal
Crossover Type     2nd Order LPF on LF and 2nd Order HPF on HF
Recommended Protective High-Pass     45 Hz for 8Ω operation, 24 dB/oct 80 Hz for 60W tap, 24 dB/oct 50 Hz for 30W, 7.5W, and 7.5W taps, 24 dB/oct
Drivers     LF: 200 mm (8.00 in) diameter LF driver, Kapton™ former, 38mm (1.5 in) voice coil, polypropylene cone and polyurethane surround.
HF: 25mm (1.0 in) diameter HF driver Polyetherimide (PEI) dome.
Enclosure     LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.
Grille     Powder coated stainless steel.
Outdoor Capability     IP-56 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.
Safety Agency     UL1480, Transformer UL Recognized per UL1876, ROHS compliant.
Input Connectors     Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section)
Wiring     Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For Installation instructions, see Installation Guide (#IS-C80MLS).
Colors     Hunter Green, RAL6018
Dimensions (H x W x D)     524 x 355 x 355 mm (20.7 x 14 x 14 in.)
Net Weight (each)     7.8 kg (17 lb)
Shipping Weight     10.5 kg (23 lb)
Included Accessories     (2) wire nuts, (2) gland nuts, (1) right-angle screwdriver
Installer-Supplied Required Tools     22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.
Optional Accessories     22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.