Oberton 10NM300

Name: Oberton 10NM300
Brand: Oberton
Price: 232.2 EUR
Availability: InStock

Oberton 10NM300

Based on 0 reviews. - Write a review

232.20€ / 454.14 лв.

Stock: Pre-Order
Model: 312

Oberton

Qty

Add to Cart

Buy with

13 x €20.65 (13 x 40.39 BGN)

Add to Wish List Compare this Product

Description
Reviews

Application : Power midrange speaker

SPECIFICATIONS

THIELE-SMALL PARAMETERS

Nominal Diameter Impedance Minimum Impedance Power Capacity AES ¹ Power Capacity ² Program Power ³ Sensitivity Frequency Range Voice Coil Diameter Voice Coil Material Voice Coil Former Voice Coil Winding Depth Magnet Gap Depth Cone Material Basket Magnet Flux Density	10"/262 inch/mm 8 Ohm 7.16 Ohm 400 W 300 W 800 W (200-2000 Hz) 100 dB/W/m 100 - 4000Hz 77 mm Aluminium Kapton™ 15 mm 9 mm Paper Die cast aluminium Neodymium 1.45 T
1. AES standard. Power is calculated on rated minimum impedance. 2. Measurement is in 30 L box enclosure tuned 60 Hz using a 50-1000 Hz band limited pink noise test signal applied continuously for 2 hours. 3. Program power is defined as 3db greater than AES Power Capacity.

Resonance Frequency Mechanical Efficiency Factor (Qms) Electrical Efficiency Factor (Qes) Total Q (Qts) Equivalent Air Volume (Vas ) Diaphragm mass ind. airload (Mms) Voice Coil Resistance Re Effective Diagram Area (Sd) Peak Linear Displacement of Diaphragm (Xmax) Mechanical Compliance of Suspension (Cms) BL Product (BL) V.C. Inductance at 1 kHz (Le)	71.36 Hz 9.15 0.214 0.209 20.61 Litres 34.62 grams 5.58 Ohms 317.3 cm2 ±5.25 mm 0.144 mm/N 20.12 T.m 0.62 mH
* Linear Mathematical Xmax is calculated as: (Hvc - Hg)/2 + Hg/4 where Hvc is the voice coil depth and Hg is the gap depth.

MOUNTING INFORMATION

Overall Diameter
Baffle Hole Diameter
Number of Mounting Holes
Bolt Circle Diameter
Overall Depth
Net Weight

262 mm
228 mm
8 with dia. 7 mm
244 mm
148.3 mm
4.75 kg

The 10NM300 neodymium loudspeaker is combining high efficiency, wide range and high power handling capability with use of 77 mm aluminium voice coil. It features aluminium die cast frame with vented neodymium magnet structure. The massive heatsink improves the cooling of the magnet structure, which reduce power compression. It is suitable for application as high power midrange or LF driver in 2-way satellite systems.

Tags: Oberton 10NM300

PRE-ORDER

Pre-order Product

Oberton 10NM300

Write a review

PRE-ORDER

About us

Profile

Customer Service